Deck Girder Bridges and Trestle Towers

A  word about TRESTLE TOWERS below and they are spectacular! 3D printed in abs plastic, plenty strong, by Hikel Layouts near Seattle WA.
           Each Tier is 3" Tall. Start with Tier 1 (the top tier when the trestle is built) and build down in 3" increments to get up to 18" tall. Tier 1 requires a 4" bridge that sits between its four legs (see picture below) and bolts to any length bridge you want to put between the towers. Pictured below is an abutment on land bolted to a 9" bridge, bolted to a 4" bridge thats sits on tier 1, bolted to another 9" bridge, bolted to another 4" bridge on top of the second tower. You can put any length bridge between the towers. Bridge piers, 1 1/2" tall come with tier 1 and fit all tiers at the bottom of the legs. Two styles, all same leg length and sloped. Sloped is for your bottom section only. (That sits on sloped ground ground or on the piers) Each 3" tier is priced separately.

        DECK GIRDER BRIDGES come in 9",12,15,18,24,30, and 36" lengths, in both single and double track configurations. You can bolt them together as long as there is support on the ends of the bridges like the towers described above. They do not come with track, and most all makes of track can be slid in under the walkways. Exception track with built in roadbed like fastrack.